LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Exhaust) >> Repair Instructions >> Floor Panel Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exhaust Front Heat Shield
    GM707400Courtesy of GENERAL MOTORS CORP.
  1. Remove the exhaust front heat shield nuts.
  2. Remove the exhaust front heat shield from the studs.
    3. Fig 2: Exhaust Heat Shield (Crew Cab Pick-Up Truck)
    GM707411Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust heat shield nuts.
  4. Remove the exhaust heat shield(s) from the studs.
scientia non olet · About LEMON Manuals