Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Exhaust Heat Shield

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the exhaust heat shield to the studs.
Install the exhaust heat shield nuts.
Tighten: Tighten the nuts to 9 N.m (80 lb in).

Fig 2: Exhaust Heat Shield (Crew Cab Pick-Up Truck)

Courtesy of GENERAL MOTORS CORP.

Install the exhaust heat shield(s) to the studs.
Install the exhaust heat shield nuts.
Tighten: Tighten the nuts to 9 N.m (80 lb in).

Fig 3: Exhaust Front Heat Shield

Courtesy of GENERAL MOTORS CORP.

Install the exhaust front heat shield to the studs.
Install the exhaust front heat shield nuts.
Tighten: Tighten the nuts to 9 N.m (80 lb in).