LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Exhaust) >> Repair Instructions >> Exhaust Heat Shield Replacement - Dash Panel >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine protection shield bolts and shield. Refer to Engine Protection Shield Replacement .
    3. Fig 1: View Of Left Exhaust Heat Shield & Nuts
    GM707396Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust heat shield nuts.
  4. Remove the exhaust heat shield from the dash panel studs (1), (3).
scientia non olet · About LEMON Manuals