LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Propeller Shaft) >> Diagnostic Information and Procedures >> Squeak Noise

Squeak Noise

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Squeak Noise

Checks Action
DEFINITION: When driving the vehicle at various speeds a squeaking sound occurs.
One or more of the universal joints have lost lubricant. Replace the universal joint. Refer to the following:
C/V boot worn or torn. Replace components as necessary.
Center bearing is dry or worn. Lube or replace the center bearing.