LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Propeller Shaft) >> Diagnostic Information and Procedures >> Knock or Clunk Noise

Knock or Clunk Noise

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Knock or Clunk Noise

Checks Action
DEFINITION: Knocking or clunking noise occurs when operating the vehicle in high gear or coasting in NEUTRAL at 16 km/h (10 mph).
One or more of the universal joints are worn or damaged. Replace the universal joint. Refer to the following:
The side gear hub counterbore in the differential is worn oversize. Replace the differential case and/or the side gears. Refer to Differential Replacement .