LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Sunshade Anchor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sunshade Anchor & Headliner
    GM931218Courtesy of GENERAL MOTORS CORP.
  1. Insert a suitable flat-bladed tool (2) into the opening at the front of the retainer and push the tool forward at a slight upward angle to contact the retaining clip (1).
  2. Press to disengage the clip from the body.
  3. Gently pull the retainer from the headliner.
  4. Remove the sunshade anchor.
scientia non olet · About LEMON Manuals