LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Rear Side Door Water Deflector Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Water deflectors seal the inner panel, preventing water from entering the door. A piece of adhesive between the deflector and the door secures the deflector.
  1. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the inside door handle. Refer to Rear Side Door Inside Handle Replacement .
    3. Fig 1: Rear Door Water Deflector
    GM831810Courtesy of GENERAL MOTORS CORP.
  3. Using a flat-bladed tool, break the bond between the sealer and the door.
  4. Remove the water deflector.
scientia non olet · About LEMON Manuals