LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Rear Door Inside Handle Bezel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inside Rear Handle Bezel
    GM833447Courtesy of GENERAL MOTORS CORP.
  1. Install the bezel to the vehicle.
  2. Install the bezel around the door handle.
  3. Install the screw that retains the handle bezel to the door panel.
scientia non olet · About LEMON Manuals