LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Pressure Relief Valve Replacement (SUV) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the quarter panel upper applique. Refer to Quarter Panel Upper Applique Replacement .
    2. Fig 1: Pressure Relief Valve (SUV)
    GM832546Courtesy of GENERAL MOTORS CORP.
  2. Using a flat-bladed tool, release the retainers (2) that retain the pressure relief valve (1) to the vehicle.
  3. Remove the pressure relief valve.
scientia non olet · About LEMON Manuals