LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Pressure Relief Valve Replacement (SUV) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Pressure Relief Valve (SUV)
    GM832546Courtesy of GENERAL MOTORS CORP.
  1. Position the pressure relief valve (1) to the vehicle, pressing into place until the retainers (2) are fully seated.
  2. Install the quarter panel upper applique. Refer to Quarter Panel Upper Applique Replacement .
scientia non olet · About LEMON Manuals