LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Liftgate Door Sill Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Liftgate Door Sill Plate
    GM833486Courtesy of GENERAL MOTORS CORP.
  1. Remove the screws that retain the liftgate sill plate.
  2. Firmly grasp and gently pull the liftgate sill plate to disengage the retaining clips.
  3. Remove the liftgate sill plate from the vehicle.
  4. Inspect for broken or missing retaining clips and replace as necessary.
scientia non olet · About LEMON Manuals