LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Liftgate Door Sill Plate Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Liftgate Door Sill Plate
    GM833486Courtesy of GENERAL MOTORS CORP.
  1. Install the liftgate sill plate to the vehicle.
  2. Align the retaining clips with the opening in the body.
  3. Gently press to fully seat the retaining clips.
    NOTE: Refer to Fastener Notice .
  4. Install the screws that retain the liftgate sill plate.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals