LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Front Side Door Trim Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Side Front Door Trim Panel
    GM833451Courtesy of GENERAL MOTORS CORP.
  1. Remove the door handle bezel. Refer to Front Side Door Inside Handle Bezel Replacement .
  2. Remove the door panel retaining screw located in the handle bezel opening.
  3. Remove the door window switch. Refer to Door Lock and Side Window Switch Replacement - Driver or Door Lock and Side Window Switch Replacement - Passenger .
  4. Use special tool J 38778  to release the door trim panel retaining clips. See Special Tools .
  5. Disconnect the electrical wiring harness connectors.
  6. Remove the door trim panel from the vehicle.