LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Front Floor Kick-Up Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Door Kick-Up Panel
    GM833501Courtesy of GENERAL MOTORS CORP.
  1. Remove the front door sill plate. Refer to Front Side Door Sill Plate Replacement .
  2. Firmly grasp and gently pull the front floor kick-up panel to disengage the retaining clips.
  3. Remove the front floor kick-up panel from around the hood release lever, if necessary.
  4. Inspect for broken or missing retaining clips and replace as necessary.
scientia non olet · About LEMON Manuals