LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Front Floor Kick-Up Panel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Door Kick-Up Panel
    GM833501Courtesy of GENERAL MOTORS CORP.
  1. Install the front floor kick-up panel around the hood release lever.
  2. Align the retaining clips with the openings in the body.
  3. Gently press to fully seat the retaining clips.
  4. Install the front door sill plate. Refer to Front Side Door Sill Plate Replacement .
scientia non olet · About LEMON Manuals