Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Surge Tank Components

Courtesy of GENERAL MOTORS CORP.

Install the surge tank inlet hose (6) to the surge tank (2).
Position the surge tank inlet hose clamp (1) to the surge tank (2).

Fig 2: Surge Tank Hose & Radiator

Courtesy of GENERAL MOTORS CORP.

Install the surge tank inlet hose (1) to the radiator.
Position the surge tank inlet hose clamp to the radiator.
Fill the cooling system. Refer to Draining and Filling Cooling System .