LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Cooling) >> Repair Instructions >> Radiator Vent Inlet Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Radiator Vent Inlet Hose
    GM801115Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Draining and Filling Cooling System .
  2. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  3. Reposition the radiator vent inlet hose clamp from the radiator.
  4. Remove the radiator vent inlet hose (2) from the radiator.
  5. Remove the radiator vent inlet hose (2) from the fan shroud retainer.
  6. Reposition the radiator vent inlet hose clamp from the throttle body.
  7. Remove the radiator vent inlet hose (2) from the throttle body.
  8. Remove the vent inlet hose from the vehicle.