LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Cooling) >> Repair Instructions >> Radiator Outlet Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Radiator Hose & Engine (Outlet)
    GM814575Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Draining and Filling Cooling System .
  2. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  3. Reposition the radiator outlet hose clamp (2) from the engine (1).
  4. Remove the radiator outlet hose (3) from the engine (1).
  5. Fig 2: Radiator Hose & Radiator (Outlet)
    GM801112Courtesy of GENERAL MOTORS CORP.
  6. Reposition the radiator outlet hose clamp (2) from the radiator (1).
  7. Remove the radiator outlet hose (3) from the radiator (1).
  8. Remove the outlet hose from the vehicle.