LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Cooling) >> Repair Instructions >> Fan Clutch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Using Special Tools For Fan Clutch
    GM362333Courtesy of GENERAL MOTORS CORP.
  1. Remove the fan shroud. Refer to Fan Shroud Replacement .
  2. Install the J 46406  to the fan clutch. See Special Tools .
    3. Fig 2: View Of Fan Assembly Removed
    GM367004Courtesy of GENERAL MOTORS CORP.
  3. Remove the fan hub nut from the water pump in a counterclockwise rotation.
    4. Fig 3: View Of Fan Clutch & Fan Blade
    GM367006Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts from the fan clutch.
  5. Remove the fan clutch from the fan blade.
scientia non olet · About LEMON Manuals