Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Drain the cooling system. Refer to Draining and Filling Cooling System .
Remove the generator. Refer to Generator Replacement .

Fig 1: Identifying Coolant Air Bleed Pipe And Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the coolant air bleed pipe bolts (1).
Remove the coolant air bleed pipe (2) with gaskets (3).

Fig 2: View Of Air Bleed Pipe Sealing Gasket

Courtesy of GENERAL MOTORS CORP.

Remove the gaskets from the coolant air bleed pipe and covers.
Discard the gaskets.

Fig 3: Coolant Air Bleed Hose & Pipe

Courtesy of GENERAL MOTORS CORP.

Remove the coolant air bleed hose (1) from the pipe (2).