LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Cooling) >> Diagnostic Information and Procedures >> Thermostat Diagnosis >> Tools Required >> Thermostat Test Procedure Using Tempil Sticks

Thermostat Test Procedure Using Tempil Sticks

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

The coolant thermostat can be tested using a temperature (tempil) stick. The temperature stick is a pencil like device. It has a wax material containing certain chemicals which melt at a given temperature. Temperature sticks can be used to determine a thermostat's operating range, by rubbing 87°C (188°F) and 97°C (206°F) sticks on the thermostat housing.

  1. Use a tempil stick in order to find the opening and the closing temperatures of the coolant thermostat.
    • J 24731  -188 tempil stick melts at 87°C (188°F). See Special Tools . The thermostat should begin to open.
    • J 24731  -206 tempil stick melts at 97°C (206°F). See Special Tools . The thermostat should be fully open.
  2. Replace the coolant thermostat if it does not operate properly between this temperature range.