LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Wiring Systems And Power Management - Component Connector End View 5 Of 5) >> Windshield Outside Moisture Sensor (CE1)

Windshield Outside Moisture Sensor (CE1)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Windshield Outside Moisture Sensor (CE1) Connector End View
GM722341Courtesy of GENERAL MOTORS CORP.
Windshield Outside Moisture Sensor (CE1)

Pin Wire Color Circuit Function
1 0.35 L-GN 482 Outside Moisture Sensor Signal 2
2 0.35 TN 481 Outside Moisture Sensor Signal 1
3 0.35 BK 1050 Ground
4 0.35 WH 2283 Rear Wiper/Washer Switch Control
Connector Part Information 
  • OEM: 15324252
  • Service: 15306387
  • Description: 4-Way F Micro-Fit Series (BK)
Terminal Part Information 
  • Terminal/Tray: 43030-0010/23
  • Core/Insulation Crimp: H/H
  • Release Tool/Test Probe: J-38125-213/J-35616-64B (L-BU)