LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Wiring Systems And Power Management - Component Connector End View 5 Of 5) >> Vehicle Shock Sensor (SPO Alarm)

Vehicle Shock Sensor (SPO Alarm)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Vehicle Shock Sensor (SPO Alarm) Connector End View
GM40399Courtesy of GENERAL MOTORS CORP.
Vehicle Shock Sensor (SPO Alarm)

Pin Wire Color Circuit Function
A 0.5 RD/WH 4540 Battery Positive Voltage
B 0.5 YE 5058 Intrusion Sensor Armed Signal
C 0.5 PU 5059 Intrusion Sensor Alarm On Signal
D - - Not Used
Connector Part Information 
  • OEM: 12064761
  • Service: 12064761
  • Description: 4-Way M Metri-Pack 150 Series (BK)
Terminal Part Information 
  • Terminal/Tray:12047581/2
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 12094429/J-35616-3 (GY)
scientia non olet · About LEMON Manuals