LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Wiring Systems And Power Management - Component Connector End View 5 Of 5) >> Stop Lamp Switch

Stop Lamp Switch

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Stop Lamp Switch Connector End View
GM1711023Courtesy of GENERAL MOTORS CORP.
Stop Lamp Switch

Pin Wire Color Circuit Function
A 0.35 L-BU/WH 6311 Brake Signal
B 0.35 PK 239 Ignition Voltage
C 0.35 OG/WH 812 12-Volt Reference or I/P Dimming Voltage Reference
D 0.35 PU 7062 Brake Pedal Switch Normally Closed Contact Signal
Connector Part Information 
  • OEM: 15466671
  • Service: 19149301
  • Description: 4-Way F GT 280 Series (L-GY)
Terminal Part Information 
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
scientia non olet · About LEMON Manuals