LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (Wiring Systems And Power Management - Component Connector End View 4 Of 5) >> Seat Cushion Ventilation Heating and Cooling Module - Driver (KB6)

Seat Cushion Ventilation Heating and Cooling Module - Driver (KB6)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Cushion Ventilation Heating and Cooling Module - Driver (KB6) Connector End View
GM1664607Courtesy of GENERAL MOTORS CORP.
Seat Cushion Ventilation Heating and Cooling Module - Driver (KB6)

Pin Wire Color Circuit Function
1 1 D-GN 6195 Driver Seat Cushion Heated/Cool Ventilation Module Heat Control
2 0.35 D-GN 5198 Driver Seat Blower Voltage Reference
3 1 PU 6196 Driver Seat Cushion Heated/Cool Ventilation Module Cool Control
4 0.35 GY 5912 Low Reference
5 0.35 YE/BK 2079 Driver Seat Cushion Temperature Sensor Signal
6 - - Not Used
7 0.35 OG 7009 Driver Seat Cushion Blower Speed Control
8 0.35 YE 2080 Low Reference
Connector Part Information 
  • OEM: E3578-003
  • Service: See Catalog
  • Description: 8-Way M (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit