LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (Wiring Systems And Power Management - Component Connector End View 4 Of 5) >> Seat Back Ventilation Heatng and Cooling Module - Passenger (KB6)

Seat Back Ventilation Heatng and Cooling Module - Passenger (KB6)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Back Ventilation Heatng and Cooling Module - Passenger (KB6) Connector End View
GM1554145Courtesy of GENERAL MOTORS CORP.
Seat Back Ventilation Heatng and Cooling Module - Passenger (KB6)

Pin Wire Color Circuit Function
1 1 YE 6197 Passenger Seat Back Heated/Cool Ventilation Module Heat Control
2 0.35 WH 5194 Passenger Seat Blower Voltage Reference
3 1 D-BU/WH 6198 Passenger Seat Back Heated/Cool Ventilation Module Cool Control
4 0.35 L-GN 5916 Low Reference
5 0.35 TN 2436 Passenger Seat Back Temperature Sensor Signal
6 - - Not Used
7 0.35 WH/BU 7011 Passenger Seat Back Blower Speed Control
8 0.35 TN 2482 Low Reference
Connector Part Information 
  • OEM: E3575-001
  • Service: See Catalog
  • Description: 8-Way F 1.5mm Unsealed (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit