LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (Wiring Systems And Power Management - Component Connector End View 4 Of 5) >> Seat Back Ventilation Heating and Cooling Module - Driver (KB6)

Seat Back Ventilation Heating and Cooling Module - Driver (KB6)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Back Ventilation Heating and Cooling Module - Driver (KB6) Connector End View
GM1554145Courtesy of GENERAL MOTORS CORP.
Seat Back Ventilation Heating and Cooling Module - Driver (KB6)

Pin Wire Color Circuit Function
1 1 BN 6193 Driver Seat Back Heated/Cool Ventilation Module Heat Control
2 0.35 D-GN 5918 Driver Seat Blower Voltage Reference
3 3 OG 6194 Driver Seat Back Heated/Cool Ventilation Module Cool Control
4 0.35 GY 5912 Low Reference
5 0.35 D-BU 2425 Driver Seat Back Temperature Sensor Signal
6 - - Not Used
7 0.35 TN 7010 Driver Seat Back Blower Speed Control
8 0.35 PK 2426 Low Reference
Connector Part Information 
  • OEM: E3575-001
  • Service: See Catalog
  • Description: 8-Way F 1.5mm Unsealed (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
scientia non olet · About LEMON Manuals