LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 562 (Wiring Systems And Power Management - Component Connector End View 3 Of 5) >> Heated Seat Element - Driver Back (AN3 or HP2, without KB6)

Heated Seat Element - Driver Back (AN3 or HP2, without KB6)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Seat Element - Driver Back (AN3 or HP2, without KB6) Connector End View
GM283890Courtesy of GENERAL MOTORS CORP.
Heated Seat Element - Driver Back (AN3 or HP2, without KB6)

Pin Wire Color Circuit Function
A 1 PK 2077 Heated Seat Cushion Element Control
B 1 PU 2424 Ground
C 0.35 D-BU 2425 Driver Heated Seat Back Temperature Sensor Signal
D 0.35 PK 2426 Low Reference
Connector Part Information 
  • OEM: 12066498
  • Service: 12085536
  • Description: 4-Way F Metri-Pack 150 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 12047581/2
  • Core/Insulation Crimp: Pins A, B - E/A
  • Core/Insulation Crimp: Pins C, D - E/C
  • Release Tool/Test Probe: 12094429/J-35616-3 (GY)