LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Engine Controls And Fuel - 6.0L - DTC P0455 To DTC U0107) >> DTC P2A01 or P2A04 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. The PCM detects that the HO2S bank 1 sensor 2 or HO2S bank 2 sensor 2 did not transition below 350 mV and above 709 mV during the passive test.
  2. One of the following tests fail:
    • Lean Intrusive Test
      • The PCM detects that the HO2S bank 1 sensor 2 or HO2S bank 2 sensor 2 is more than 350 mV for 60 seconds.
      • The HO2S bank 1 sensor 1 and HO2S bank 2 sensor 1 is less than 300 mV.

        OR

    • Rich Intrusive Test
      • The PCM detects that the HO2S bank 1 sensor 2 or HO2S bank 2 sensor 2 is less than 709 mV for 60 seconds.
      • The HO2S bank 1 sensor 1 and HO2S bank 2 sensor 1 is more than 600 mV.
scientia non olet · About LEMON Manuals