Fastener Tightening Specifications (Off Vehicle)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Application	Ref No.*	Quantity	Size	Specification
Application	Ref No.*	Quantity	Size	Metric	English
Case Extension to Case Assembly	16	6	M10x1.5x40	55 N.m	41 lb ft
Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly	310	6	M5x0.8x55	8 N.m	71 lb in
Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly	309	10	M5x0.8x45	8 N.m	71 lb in
Control Solenoid Valve Heat Sink to Valve Body	312	2	M5x0.8x53	8 N.m	71 lb in
Control Valve Upper Body Assembly to Control Valve Lower Body Assembly	301	12	M5x0.8x36	8 N.m	71 lb in
Control (with Body and Valve) Valve Assembly to Case Assembly	22	6	M5x0.8x73	8 N.m	71 lb in
Fluid Pan Assembly to Case Assembly	30	18	M6x1.0x20	9 N.m	80 lb in
Fluid Pump Cover Assembly to Torque Converter Housing	231	13	M6 1.0x40	11 N.m	97 lb in
Input and Output Speed Sensor Assembly to Control Valve Upper Body Assembly	302	2	M6x1.0x20	12 N.m	106 lb in
Line Pressure Test Hole Plug to Torque Converter Housing	202	1	1/8-27 NPTF	11 N.m	97 lb in
Manual Shaft Detent Assembly to Valve Body	23	1	M6x1.0x14.5	12 N.m	106 lb in
Torque Converter Housing Assembly to Case Assembly	3	9	M10x1.5x50	72 N.m	53 lb ft
*Reference number refers to the component callout number in Disassembled Views