LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Wiring Systems And Power Management - Inline Harness Connector End Views - X101 To X272) >> Inline Harness Connector End Views >> X205 Brake/Clutch Harness to Instrument Panel Harness

X205 Brake/Clutch Harness to Instrument Panel Harness

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM2546764
GM831382
Connector Part Information
  • Harness Type: Brake/Clutch
  • OEM Connector: 13677819
  • Service Connector: 13584478
  • Description: 16-Way F GT FBT 150/280 Series (BK)
 Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 15336224
  • Service Connector: 88986321
  • Description: 16-Way M GT 150, 280 Series, Sealed (BK)
Terminal Part Information
  • Pins: B-G, K-N, P, R
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: Not Available
  • Diagnostic Test Probe: Not Available
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
  • Pins:A, H, J, S
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: Not Available
  • Diagnostic Test Probe: Not Available
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
 Terminal Part Information
  • Pins: B-G, K-N, P, R
  • Terminated Lead: 13327129
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-3 (GY)
  • Terminal/Tray: 15304702/19
  • Core/Insulation Crimp: Pins - B-G, L-N, P, R: E/C
  • Core/Insulation Crimp: Pin - K: E/4
  • Pins: A, H, J, S
  • Terminated Lead: 13575505
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-5 (PU)
  • Terminal/Tray: 15304722/8
  • Core/Insulation Crimp: E/C
X205 Brake/Clutch Harness to Instrument Panel Harness

Pin Wire Circuit Function Pin Wire Circuit Function
A 0.5 YE 5361 Brake Apply Sensor Signal A 0.5 YE 5361 Brake Apply Sensor Signal
- - Not Used (HP2)
B 0.35 L-BU 1162 Accelerator Pedal Position (APP) Sensor 2 Signal B 0.35 L-BU 1162 Accelerator Pedal Position (APP) Sensor 2 Signal
C 0.35 TN 1274 5-Volt Reference C 0.35 TN 1274 5-Volt Reference
D 0.35 D-BU 1161 Accelerator Pedal Position (APP) Sensor 1 Signal D 0.35 D-BU 1161 Accelerator Pedal Position (APP) Sensor 1 Signal
E 0.35 PU 1272 Low Reference E 0.35 PU 1272 Low Reference
F 0.35 TN 552 12-Volt Reference F 0.35 TN 552 12-Volt Reference
G 0.35 GY 598 Ignition Voltage G 0.35 GY 598 12-Volt Reference (HP2)
H 0.35 YE 6817 Ignition Voltage H 0.35 YE 6817 Ignition Voltage
- - Not Used (HP2)
J 0.5 WH 5359 Brake Apply Sensor Supply Voltage J 0.5 WH 5359 Brake Apply Sensor Supply Voltage
- - Not Used (HP2)
K 0.5 BN 5360 Low Reference K 0.5 BN 5360 Low Reference
- - Not Used (HP2)
L 0.35 WH/BK 1164 5-Volt Reference L 0.35 WH/BK 1164 5-Volt Reference
M 0.35 BN 1271 Low Reference M 0.35 BN 1271 Low Reference
N 0.35 L-GN 526 Stop Lamp Switch Signal N 0.35 L-GN 526 Stop Lamp Switch Signal
P 0.35 L-BU/WH 6311 Cruise/ETC/TCC Brake Signal P 0.35 L-BU/WH 6311 Cruise/ETC/TCC Brake Signal
R 0.35 PK 239 Run/Crank Ignition 1 Voltage R 0.35 PK 239 Run/Crank Ignition 1 Voltage
S 0.5 YE/BK 5813 Park Enable (5W4 or PPV) S 0.5 YE/BK 5813 Park Enable (5W4 or PPV)
scientia non olet · About LEMON Manuals