LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (Wiring Systems And Power Management - Component Connector End Views - A/C Compressor To EBCM (JH6)) >> Component Connector End Views >> Audio Amplifier X1 (UQA, without STZ or Y91)

Audio Amplifier X1 (UQA, without STZ or Y91)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1715234Courtesy of
Connector Part Information
  • Harness Type: Floor Console
  • OEM Connector: 13544530
  • Service Connector: 13581412
  • Description: 8-Way F 2.8 Series (L-GY)
Terminal Part Information
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: J-38125-29
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: Pins 2, 3, 6, 7 - 13544536/Not Available
  • Terminal/Tray: Pins 4, 8 - 13544537/Not Available
  • Core/Insulation Crimp: Not Available
Audio Amplifier X1 (UQA, without STZ or Y91)

Pin Wire Circuit Function
1 - - Not Used
2 0.35 L-BU/BK 315 Right Subwoofer Speaker Output (-)
3 0.35 L-GN/BK 1794 Left or Rear Subwoofer Speaker Output (-)
4 2 RD/WH 3740 Battery Positive Voltage
5 - - Not Used
6 0.35 D-GN 1795 Right Subwoofer Speaker Output (+)
7 0.35 D-BU/WH 346 Left or Rear Subwoofer Speaker Output (+)
8 1 BK 2550 Ground