LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Automatic Transmission - 2ML70 - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Manual Shift Shaft Seal Replacement

Manual Shift Shaft Seal Replacement

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Manual Shift Shaft Seal
GM1867781Courtesy of GENERAL MOTORS COMPANY
Manual Shift Shaft Seal Replacement

Callout Component Name
1 Manual Shift Shaft Seal
CAUTION:

Do not damage the case bore during removal of the manual shift shaft seal.

CAUTION:

When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.

NOTE:

Always install a NEW seal into the case.

Special Tools

  • DT 47770  Seal Installer
  • J 45201  Cooler Line Seal Remover