Control Solenoid Valve and Valve Body Assembly Disassemble
WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Control Solenoid Valve and Valve Body Assembly Disassemble
| Callout | Component Name |
|---|---|
| 1 | Control Solenoid Valve Heat Sink (w/Body and TCM) Bolt M5 x.8 x 53 (Qty: 2) |
| 2 | Control Valve Lower Body Bolt M6 x 1.0 x 55 (Qty: 9) |
| 3 | Control Solenoid (w/Body and TCM) Valve Assembly |
| 4 | Control Valve Channel Plate Spacer Plate Gasket
CAUTION:
Use care when handling the control valve body assembly. If dropped, damage to the control solenoid valve body assembly internal components, including the transmission control module (TCM), may result.
CAUTION:
Discard the filter plate. Replace with a NEW filter plate. Reusing an old filter plate may cause damage to the control solenoid valve assembly. |
| 5 | A/Trans Wiring Harness Assembly |