Control Solenoid (w/Body and TCM) Valve Installation
WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Control Solenoid (w/Body and TCM) Valve Installation
| Callout | Component Name |
|---|---|
| 1 | Control Solenoid (w/Body and TCM) Valve Assembly TIP: Note the locator pin on the control valve lower body assembly while aligning the control solenoid valve assembly. |
| 2 | Control Solenoid Valve Heat Sink (w/Body and TCM) Bolt M5 x.8 x 53 (Qty: 2) TIP: Hand tighten only. |
| 3 | Control Valve Lower Body Bolt M6 x1.0 x 55 (Qty: 9) TIP: Hand tighten only. |