Control Bodies Contact Gap Inspection
WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Control Bodies Contact Gap Inspection
| Callout | Component Name |
|---|---|
| 1 | Control Solenoid (w/Body and TCM) Valve Assembly TIP: Inspect the contact area between the "heat sink" area of the control solenoid valve assembly and the valve body. There should be no visible gap. If a gap exists, loosen all 18 bolts and retighten in the required sequence. |