4th Clutch Piston Installation
WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
4th Clutch Piston Installation
| Callout | Component Name |
|---|---|
| 1 | 4th Clutch Piston TIP: Use a 2 inch spacer between DT-48056 spring compressor bridge and DT-47694 piston spring compressor. Special Tools
|
| 2 | 4th Clutch Piston Retaining Spring Assembly |
| 3 | 4th Clutch Piston Retaining Ring TIP: Do not reuse the retaining ring. |
| 4 | 4th Clutch Waved Plate |
| 5 | 4th Clutch Plate TIP: Alternate between steel and fiber clutch plates. |
| 6 | 4th Clutch Plate Assembly TIP: Alternate between steel and fiber clutch plates. |
| 7 | 4th Clutch Backing Plate |
| 8 | 4th Clutch Piston Retaining Ring TIP: Do not reuse the retaining ring. |