LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 538 (Engine Mechanical - 5.3L, 6.0L, 6.2L - Description And Operation) >> Description And Operation >> Engine Component Description >> Engine Block - RPO LC9/L94/L9H

Engine Block - RPO LC9/L94/L9H

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The engine block is a cam-in-block deep skirt 90 degree V configuration with 5 crankshaft bearing caps. The engine block is cast aluminum. The 5 crankshaft bearing caps each have 4 vertical M10 and 2 horizontal M8 mounting bolts. The camshaft is supported by 5 camshaft bearings pressed into the block. The left bank of cylinders are number 1-3-5-7 (#1 is front left) and the right bank of cylinders are 2-4-6-8 (#2 is front right) viewed from the flywheel end of the engine. The engine firing order is 1-8-7-2-6-5-4-3.

scientia non olet · About LEMON Manuals