LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 537 (Automatic Transmission - 6L80/6L90 - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Transmission Fluid Pan Installation (6L80)

Transmission Fluid Pan Installation (6L80)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transmission Fluid Pan Installation (6L80)
GM1980155Courtesy of GENERAL MOTORS COMPANY
Transmission Fluid Pan Installation (6L80)

Callout Component Name
1 Fluid Pan Gasket
TIP:  The fluid pan gasket is reusable. Inspect the gasket to determine if it may be reused. If the gasket is stuck to the case or pan, it should be replaced.
2 Fluid Pan Assembly
3 Fluid Pan Bolts M6 x 20 (Qty: 18)
CAUTION:

Refer to Fastener Caution .


Procedure 
Tighten in sequence shown.
Tighten 
9 N.m (80 lb in)