Output Internal Gear Disassemble (6L80/6L90)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Output Internal Gear & Carrier Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
NOTE: This procedure only applies to the second design output shaft assembly (output internal gear assembly). If you are disassembling a first design out shaft assembly, refer to Output Shaft Disassemble (6L80/6L90) . NOTE: Inspect each component and replace as necessary.
1	Output Carrier Assembly
2	Output Carrier Thrust Bearing Assembly
3	Output Internal Gear Assembly