LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 537 (Automatic Transmission - 6L80/6L90 - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Output Carrier to Output Shaft Assemble (6L80/6L90)

Output Carrier to Output Shaft Assemble (6L80/6L90)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Output Carrier To Output Shaft Component View
GM1706884Courtesy of GENERAL MOTORS COMPANY
Output Carrier to Output Shaft Assemble (6L80/6L90)

Callout Component Name
1 Output Carrier Thrust Bearing Assembly
2 Output Carrier Internal Front Gear
CAUTION:

Install the gear flat side down. Failure to install the gear flat side down may result in transmission damage.
3 Output Shaft Assembly
4 Output Carrier Internal Gear Retaining Ring
TIP:  Grasp the output shaft and carrier with both hands to turn over.
scientia non olet · About LEMON Manuals