Manual Shift Shaft Seal Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing Manual Shift Shaft Seal

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Procedure
1	Manual Shift Shaft Seal CAUTION: Do not damage the case bore during removal of the manual shift shaft seal. CAUTION: When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result. CAUTION: Refer to Seal Reuse Caution . Special Tools DT 47770 Seal Installer DT 45201 Cooler Line Seal Remover For equivalent regional tools, refer to Special Tools .

Callout

Component Procedure

Manual Shift Shaft Seal

CAUTION:

Do not damage the case bore during removal of the manual shift shaft seal.

CAUTION:

When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.

CAUTION:

Refer to Seal Reuse Caution .

Special Tools

DT 47770 Seal Installer
DT 45201 Cooler Line Seal Remover

For equivalent regional tools, refer to Special Tools .