Low and Reverse Clutch Backing Plate Retaining Ring Measurement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Low & Reverse Clutch Backing Plate Retaining Ring

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Install DT-47868-1 pack travel weight and DT-47868-4 travel weight adapter onto the low and reverse clutch backing plate. Attach the GE 8001 dial indicator set to the GE 26900-13 magnetic base and zero out the dial indicator on the DT-47868-1 pack travel weight. Special Tools DT-47868-1 Pack Travel Weight DT-47868-4 Clutch Travel Weight Adapter GE 8001 Dial Indicator Set GE 26900-13 Magnetic Base For equivalent regional tools, refer to Special Tools .
1	Low and Reverse Backing Plate Retaining Ring TIP: Apply compressed air to the apply passage hole, at least 3 times and observe the dial indicator measurement each time. This action"fluffs" the clutch plates to ensure an accurate measurement. Refer to Clutch Backing Plate Retaining Ring Specifications (6L90) , Clutch Backing Plate Retaining Ring Specifications (6L80) .

Callout

Component Name

Preliminary Procedures

Install DT-47868-1 pack travel weight and DT-47868-4 travel weight adapter onto the low and reverse clutch backing plate.
Attach the GE 8001 dial indicator set to the GE 26900-13 magnetic base and zero out the dial indicator on the DT-47868-1 pack travel weight.

Special Tools

DT-47868-1 Pack Travel Weight
DT-47868-4 Clutch Travel Weight Adapter
GE 8001 Dial Indicator Set
GE 26900-13 Magnetic Base

For equivalent regional tools, refer to Special Tools .

Low and Reverse Backing Plate Retaining Ring
TIP: Apply compressed air to the apply passage hole, at least 3 times and observe the dial indicator measurement each time. This action"fluffs" the clutch plates to ensure an accurate measurement. Refer to Clutch Backing Plate Retaining Ring Specifications (6L90) , Clutch Backing Plate Retaining Ring Specifications (6L80) .