LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 537 (Automatic Transmission - 6L80/6L90 - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Fluid Pump Cover Cleaning and Inspection

Fluid Pump Cover Cleaning and Inspection

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Fluid Pump Cover Components
GM2178714Courtesy of GENERAL MOTORS COMPANY
Fluid Pump Cover Cleaning and Inspection

Callout Component Name
WARNING:

Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.

Preliminary Procedure Clean and inspect all components and machined surfaces.
1 Pressure Regulator Valve Train
2 Converter Feed Limit Valve Train
3 Pressure Relief Ball Valve and Spring
4 TCC Control Valve and Spring
5 A/Trans Fluid Pump Locator Pin