Control Solenoid Valve Assembly Removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Control Solenoid Valve Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Bolt M5 x 53 (Qty: 2) |
| 2 | Bolt M5 x 55 (Qty: 4) |
| 3 | Bolt M5 x 45 (Qty: 5) |
| 4 | Control Solenoid (w/Body and TCM) Valve Assembly
CAUTION:
Use care when handling the control valve body assembly. If dropped, damage to the control solenoid valve body assembly internal components, including the transmission control module (TCM), may result. |
| 5 | Filter Plate Assembly
CAUTION:
Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination.
CAUTION:
Discard the filter plate. Replace with a NEW filter plate. Reusing an old filter plate may cause damage to the control solenoid valve assembly. |