Valve Body, Control Solenoid Torque Sequence

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Control Solenoid Torque Sequence

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
CAUTION: Bolt torque sequencing is critical to the proper function of the control solenoid valve assembly. Failure to follow the required sequencing may result in transmission malfunction. Preliminary Procedure Hand tighten the last 6 bolts before final torque sequence. The 2 "heat sink" bolts must be tightened last.
1	Bolts M5 x 45 (Qty: 5)
2	Bolt M5 x 55 CAUTION: Refer to Fastener Caution . Procedure Tighten all 18 bolts in the sequence shown. Tighten 8 N.m (71 lb in).

Callout

Component Name

CAUTION:

Bolt torque sequencing is critical to the proper function of the control solenoid valve assembly. Failure to follow the required sequencing may result in transmission malfunction.

Preliminary Procedure

Hand tighten the last 6 bolts before final torque sequence.
The 2 "heat sink" bolts must be tightened last.

Bolts M5 x 45 (Qty: 5)

Bolt M5 x 55

CAUTION:

Refer to Fastener Caution .

Procedure
Tighten all 18 bolts in the sequence shown.
Tighten
8 N.m (71 lb in).