2-6 Clutch Piston Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing 2-6 Clutch Piston

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	2-6 Clutch Spring Retaining Ring TIP: Ensure the DT 47761 spring compressor is centered over the clutch spring. Special Tool DT 47761 Clutch Spring Compressor For equivalent regional tools, refer to Special Tools .
2	2-6 Clutch Spring CAUTION: Ensure the spring tabs are facing down during installation and that the tabs fit between the teeth on the piston. Failure to do so may cause damage to the clutch assembly.
3	2-6 Clutch Piston Assembly TIP: It may be necessary to apply air to the apply passage in order to unseat the piston.