Apply Compressed Air and Measurement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 1-2-3-4 Clutch Backing Plate Retaining Ring Component View

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Install the DT 47868-2 base adapter onto the torque converter housing. Install DT 47868-1 travel weight and DT-47868-3 travel weight adapter onto the 1-2-3-4 clutch backing plate. Install the GE 26900-13 magnetic base onto DT 47868-2 base adapter. Attach the GE 8001 dial indicator set to the GE 26900-13 magnetic base. Special Tools DT 47868-1 Clutch Pack Travel Weight DT 47868-2 Magnetic Base Adapter DT-47868-3 Clutch Travel Weight Adapter GE 8001 Dial Indicator Set GE 26900-13 Magnetic Base For equivalent regional tools, refer to Special Tools .
1	Compensator Feed Fluid Passage Procedure Apply compressed air to the compensator feed fluid passage. Zero out the dial indicator J 8001 dial indicator set.
2	1-2-3-4 Clutch Apply Passage Procedure While Applying compressed air to the compensator feed fluid passage, simultaneously apply compressed air to the 1-2-3-4 clutch apply passage. Do this at least 3 times and observe the dial indicator measurement each time. Refer to Clutch Backing Plate Retaining Ring Specifications (6L90) , Clutch Backing Plate Retaining Ring Specifications (6L80) .

Callout

Component Name

Preliminary Procedures

Install the DT 47868-2 base adapter onto the torque converter housing.
Install DT 47868-1 travel weight and DT-47868-3 travel weight adapter onto the 1-2-3-4 clutch backing plate.
Install the GE 26900-13 magnetic base onto DT 47868-2 base adapter.
Attach the GE 8001 dial indicator set to the GE 26900-13 magnetic base.

Special Tools

DT 47868-1 Clutch Pack Travel Weight
DT 47868-2 Magnetic Base Adapter
DT-47868-3 Clutch Travel Weight Adapter
GE 8001 Dial Indicator Set
GE 26900-13 Magnetic Base

For equivalent regional tools, refer to Special Tools .

Compensator Feed Fluid Passage

Procedure

Apply compressed air to the compensator feed fluid passage.
Zero out the dial indicator J 8001 dial indicator set.

1-2-3-4 Clutch Apply Passage
Procedure
While Applying compressed air to the compensator feed fluid passage, simultaneously apply compressed air to the 1-2-3-4 clutch apply passage. Do this at least 3 times and observe the dial indicator measurement each time. Refer to Clutch Backing Plate Retaining Ring Specifications (6L90) , Clutch Backing Plate Retaining Ring Specifications (6L80) .