Conditions for Setting the DTC

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

The TP sensor 1 voltage is less than 0.38 volts or more than 4.5 volts for more than 0.1 second.
OR
The TP sensor 1 minimum throttle blade position is less than 0.38 volts or more than 0.71 volts for less than 1 second.
OR
The 5-volt reference circuit of the TP sensor 1 is shorted to ground for more than 0.01 second.
OR
The 5-volt reference circuit of the TP sensor 1 is less than 4.54 volts or more than 5.21 volts for more than 1 second.