LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 522 (Steering Linkage System) >> Repair Instructions >> Pitman Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering gear. Refer to Steering Gear Replacement (Recirculating Ball Without LMM) , Steering Gear Replacement (HP2) , Steering Gear Replacement (Hydraulic Rack and Pinion) .
  2. Place the steering gear into a vise.
    3. Fig 1: View Of Steering Gear And Pitman Arm
    GM1862648Courtesy of GENERAL MOTORS COMPANY
  3. Remove the pitman arm nut (1) and washer (2).
    4. Fig 2: Pitman Arm & Power Steering Gear (Non Rack and Pinion)
    GM398243Courtesy of GENERAL MOTORS COMPANY
  4. Remove the pitman arm from the pitman arm shaft using J 6632-01  pitman arm puller or J 29107-A  pitman arm puller.
scientia non olet · About LEMON Manuals